Skip to Content
The 8HP distribution system is a modular system for low-voltage small distribution.
The optimum design of these high quality materials fulfills all the demands made on enclosures. This includes:
All enclosure parts and operating mechanisms are designed so that, if closed during operation, they fulfill the requirements of the protective measure "Total Insulation" according to DIN VDE 0100 Part 410. All enclosure fixings are on the outside.
It is suitable for use in all industrial and commercial areas, in power plants, large public and private buildings, public utility companies, as well as office and residential buildings.
The components of the 8HP distribution system comply with the requirements of type-tested low-voltage switchgear assemblies (TTA) according to EN 60439-1/DIN VDE 0660 Part 500. The enclosure complies with the protective measure "Total Insulation" according to DIN VDE 0100.
DIN VDE 0660 Part 500
Specifications for type-tested low-voltage switchgear assemblies (TTA)
DIN VDE 0110
Specifications for rating the creepage distances and clearances of electrical equipment
Ready-made switchgear assemblies for low voltage
DIN VDE 0660 Part 107
Specifications for low-voltage controls
DIN VDE 0100
Specifications for the erection of power installations with rated
Declaration of conformity
This declares conformity of the components and distribution boards with the safety requirements for low-voltage equipment as specified in the EU Directive dated 19.02.1973.
Special tests passed
Fire tests for equipment used in mining are performed by the Versuchsgrube Tremonia, Dortmund, Germany.
Shock tests for equipment used in protective rooms are performed by the Bundesamt für Zivilschutz, Bad Godesberg, Germany, regulation category RK 1.0/10 to safety level "A", certificate of use 036/95.
Earthquake tests are performed by the IAB, Ottobrunn, Germany.
The enclosure is UL-certified.