E-Counters PAC1500
E counters measure both active and reactive energy precisely and comply with accuracy class 1 (for active energy).
Overview
E-counters are used to measure the power consumption in 3-phase systems, e.g. in industrial plants, offices and apartments in apartment houses.
Cost pressures are growing, particularly in industry. Product operating times are reduced and manufacturing facilities must be retrofitted more frequently. The load levels of the distribution boards during operation are therefore constantly under observation in order to avoid peak loads in a timely manner or to perform retrofitting.
The versions can be used for consumption analysis and minimization of operating costs in industrial plants and office buildings. The device versions with LAN interfaces allow a readout to be performed easily using an existing LAN network.
The devices indicate 6 measured values on an LCD display: Active energy rate 1 and rate 2, reactive energy rate 1 and rate 2, active power and reactive power. This means that the current load of a distribution board can be read out.
Benefits
- For practically unlimited use: E-counters for direct connection, 63 A for small plants and up to 5000 A with transformer for large plants.
- The devices indicate the instantaneous power in addition to the consumption, providing an overview of plant capacity utilization at all times and saving additional measuring devices into the bargain
- The measurement data are constantly stored as a text file with a time and date stamp. This allows users to create flexible designs for their own specific solutions (e.g.with MS Excel)